Skip to content

Four power LEDs ​

Four power LEDs show approximate battery level and charging progress. The same indicators can also be used for startup sequences, alerts or model-specific functions. This capability describes the standard four-bar display, not every device that happens to have four visible lights.

Normal battery display ​

A short status-button press normally shows the battery level briefly. The four indicators use these approximate bands:

Battery levelNormal battery display
Below 20%First indicator flashes when showing status off charge
20% to below 40%1 indicator
40% to below 60%2 indicators
60% to below 80%3 indicators
80% or more4 indicators

Battery level

55%

On: 1, 2

2 of 4 LEDs on.

Enable JavaScript to adjust this example.

Four lights are not an exact 100% reading. These examples use orange power LEDs; see your model for its layout and any display overrides.

Charging ​

  • Below about 95%, the highest lit battery indicator blinks, roughly one second on and one second off. At very low charge, the first indicator blinks.
  • At about 95% or above, the normal charging display becomes steady. This means a high charge level, not an exact 100% reading.
  • When unplugged and resting, the lights normally go out after any temporary status display finishes. A button press, startup or other activity can still light them.

Charging progress

55%

On: 1, 2

The highest lit LED blinks while charging.

Enable JavaScript to adjust this example.

Other uses of the same indicators ​

Startup, alarms, custom applications and remote LED control can temporarily replace the normal display. Some products also use the indicators for a connection state: see the VT3 connection display.

For a practical starting point, use the LED guide. The number of visible indicators does not by itself establish the number of independently controllable API outputs.