Skip to content

GPS and GSM status LEDs ​

Some older trackers have two diagnostic indicators: one for GPS and one for the mobile network, often labelled GSM. These are separate from the four power LEDs.

The pair describes receiver and connection state, not a general fault code. It is not present on Pro3 or ZE3, and is not the RGB status LED capability used by RH2.

Diagnostic display ​

Use the supplied device instructions to identify the secondary diagnostic colour, and the model notes below to check which indicators your device has. It is not universally green. Both channels can be on together; this does not establish a third, universal mixed colour.

Mobile-network indicatorWhat the standard display can mean
Red onlyFlight mode is enabled, or signal strength is zero/unknown while the connection is not open
Red and secondary colour togetherOne signal bar is reported and the connection is not open, with flight mode off
Secondary colour onlyAt least two signal bars are reported or the connection is open, with flight mode off

The mobile indicator is not confirmation that data reached the server. Check the latest successful communication in the app or portal.

GPS indicator while the receiver is awakeWhat the standard display can mean
Red onlyNo fix yet, before the waiting-for-fix stage
Red and secondary colour togetherWaiting for a fix, without a lock yet
Secondary colour onlyA fix is available, or the receiver has moved beyond the waiting-for-fix stage

When GPS is asleep, its indicator can reflect whether the previous fix attempt failed rather than whether there is a live fix now. A secondary-colour light alone is therefore not a guarantee of a current accurate location. Check the location timestamp and accuracy in the app or portal.

Colour variants ​

Pro PR2 ​

ProN/PR2, device ID prefix 20, has four battery indicators and the separate GPS/GSM pair. Its two-red/four-orange startup example belongs to this model, not Pro3.

Zero ZE2 ​

ZeroN/ZE2, prefix 19, uses the same diagnostic logic. A firmware channel named G does not establish that the physical light is green. Use the icons on the case to identify the indicators. ZE3 does not have this pair.

Enviro EN2 ​

EnviroN/EN2, prefix 26, uses the shared diagnostic logic. Use the diagnostic colours described in the supplied device instructions. Do not infer a colour chart from another six-indicator model; ask support if the colours differ from the supplied instructions.

Limits ​

Both colour channels can be lit together. Their appearance depends on the components and case, so there is no universal third mixed colour. Startup, alarms and application control can override the ordinary diagnostic display. Use the LED guide to put a pattern in context.