Skip to content

Vehicle (VT3) ​

Feature guides ​

Selected shared features, with more guides to come. This is not a complete feature list.

Do not apply the older GPS/GSM colour table or RH2 RGB charging table to VT3.

Vehicle connection status ​

After showing battery status, a short status-button press shows ignition and charging information in five brief flash cycles, about 0.3 seconds on and 0.2 seconds off:

Indicator pairFlashes when
1 and 2The device detects ignition high
3 and 4The device reports that it is charging

Both pairs can flash when both conditions are true. These are logical indicator numbers, not a left-to-right enclosure diagram. The example below shows the reported conditions, not the physical colour or orientation of the indicators. Choose the reported conditions, then play or step through the five cycles.

VT3 connection status

On: 1, 2, 3, 4 · cycle 1 of 5

Choose example conditions

Both pairs flash together. Five cycles: 0.3 seconds on, 0.2 seconds off.

Enable JavaScript to adjust this example.

The display can also appear when charging starts or ignition becomes high. Paired flashing can therefore be normal. External power does not always mean the battery is currently charging, so an unlit charging pair alone is not proof of a wiring fault.

Follow the installation checks and confirm the reported external-power and ignition state where available. If those readings do not match the wiring, ask support before changing the installation.

Overview ​

Our wired core GPS tracking device.

NameVehicle
Version3
SKUVT3
Serial prefix40
Connectivity
Positioning
Sensors

Specification ​

AttributeValue
DeviceVT3
First produced2024
Size96 x 75 x 26 mm
Weight142-180g (depending on battery configuration) + 36g cable
Battery1x 2000mah mAh (Rechargeable), Room to double capacity
SimIntegrated roaming sim
GSM4G LTE CAT-1 Global Operation (850/900/1800/1900MHz integ. antenna), 2G GPRS Fallback
Bluetooth5.0
PositioningGPS (GPS, GLONASS, BEIDOU, GALILEO & QZSS) 18mm Patch antenna & GSM
SensorsTemperature, Orientation, Accelerometer, External Bluetooth, Voltage, Ignition
Memoryup to 1000 locations update when they can't be transmitted
IP ratingIP66 Waterproof & Shockproof
Operating Temperature0°C to 60°C ¹
Buttons1
LEDs4
SoundNone
PowerSupports 6-60v DC (overvoltage protection to 200v), via 3 pin connector
AdditionalConfigurable maximum power draw
Typical UsageTracking of powered assets

¹ All device batteries can be customized down to -40°C with other tradeoffs, please contact us for more information.