Skip to content

External ​

IP67 rated rugged enclosure, made out of Polycarbonate-ABS.

Dimensions:

  • With the Antenna: 129.7 x 72.6 x 49.75 mm
  • Without the Antenna: 95 x 72.6 x 30 mm

Front ​

Front view of the RH2 including dimensions, with and without the antenna
Front view of the RH2 including dimensions, with and without the antenna

2.13" monochrome e-ink display with a resolution of 250x122 pixels, which is visible in direct sunlight and has a very low power consumption.

IP67 SMA Connectors for external GNSS antennas (antenna seen is included as standard).

3 large buttons for easy operation with gloves and harsh environments.

The illustrated enclosure has two sets of RGB lights:

  • Status lights at the corners, used for device status and charging.
  • Application-controlled lights in the centre, above the screen.

The physical layout does not by itself establish which software is controlling a light. Use the RH2 LED indicators for the standard status display, and the running application’s instructions for its feedback. Do not apply Pro3 battery-bar patterns to RH2.

Side ​

Side view of the RH2 including dimensions, and antenna details
Side view of the RH2 including dimensions, and antenna details

Back ​

Back view of the RH2, including details of the siren, mount and versatile connector
Back view of the RH2, including details of the siren, mount and versatile connector

An 82dB siren for audible alerts.

KickFast mount for easy attachment to belts, bags, tripods, poles, etc.

Versatile connector for charging, data, analog I/O, and more, suitable for docking & permanent wiring. Corrosion resistant gold plated beryllium copper pins.

Top and Bottom ​

Top and bottom view of the RH2
Top and bottom view of the RH2