Skip to content

Enviro (EN2) ​

Feature guides ​

Selected shared features, with more guides to come. This is not a complete feature list.

This page covers EN2; use the product code and device ID when following the LED guide.

Overview ​

Our core tracking device with additional environmental sensors.

NameEnviro
Version2
SKUEN2
Serial prefix26
Connectivitycellular, bluetooth-le
Positioninggnss, wifi
Sensorsaccelerometer, temperature, humidity, pressure

Overview ​

Our core tracking device with additional environmental sensors.

NameEnviro
Version2
SKUEN2
Serial prefix26
Connectivitycellular, bluetooth-le
Positioninggnss, wifi
Sensorsaccelerometer, temperature, humidity, pressure

Physical ​

Size
Dimensions Mm85 x 44 x 28.4
Weight G152
Certifications
0CE
Rating
IkShockproof
Operating Temperature C-20 to +60

Integrations ​

Cloud
Supported PlatformsLightbug Cloud (Hosted or On-premise), Other clouds supported via Forwarding
Native ProtocolsUDP, TCP
Forwarding ProtocolsMQTT, HTTP(S), WebSocket

User Interface ​

Buttons
Multi PurposeStatus Check, Trigger Update, Software Reset, Hardware Reset
Leds
Battery4 battery-level indicators, Show approximate charge level and charging progress
GPS And Mobile Network2 diagnostic status indicators, Diagnostic status; see the LED guide for restart and normal patterns

Connectivity ​

Cellular
TechnologiesLTE CAT-M1, GPRS, EDGE
TerritoryGlobal
BandsLTE FDD: B1, B2, B3, B4, B5, B8, B12, B13, B18, B19, B20, B26, B28
LTE TDD: B39
Gsm: 850MHz, 900MHz, 1800MHz, 1900MHz
Bluetooth LE
TechnologiesLow Power Broadcasting (iBeacon), Gateway Scanning, Child (peripheral) device
TerritoryGlobal
Version5.4

Positioning ​

Gnss
Typical Accuracy Meters1-5
TechnologiesGPS, GLONASS, BeiDou
ConstellationsGPS: Bands: L1: 1575.42
GLONASS: Bands: L1: 1602 + n x 0.5625 (n=-7,...6)
BeiDou: Bands: L1: 1575.42
Wifi
Typical Accuracy Meters10-30
Technologies2.4Ghz Wi-Fi AP scanning

Sensors ​

Accelerometer
Features3-axis accelerometer, Motion Detection, Orientation & Tilt detection, Shock and Vibration detection
Typical Accuracy G0.01
Temperature
FeaturesTemperature Sensing (high accuracy), Thermal Protection
Typical Accuracy C0.5
Humidity
Typical Accuracy Pct3
Pressure
Typical Accuracy Hpa0.002

Battery ​

Overall
Capacity mAh6600
Pack Configuration1S2P
Voltage V3.7
Cells
Type18650
SpecModel: 18650 3300mAh
Type: Li-ion Cell
Nominal Voltage V: 3.7
Nominal Capacity mAh: 3300
Nominal Energy Wh: 12.21
Physical Dimensions Mm: 65.0*18.0
Appearance: Blue cylindrical battery
Certifications And Tests: Standard: UN38.3 (UNITED NATIONS 'Recommendations on the TRANSPORT OF DANGEROUS GOODS' Manual of Tests and Criteria ST/SG/AC.10/11/Rev.6, 38.3)
Tests: Altitude Simulation: No leakage, no venting, no disassembly, no rupture & no fire
Thermal Test: No leakage, no venting, no disassembly, no rupture & no fire
Vibration: No leakage, no venting, no disassembly, no rupture & no fire
Shock: Included as a test item in the UN38.3 report
External Short Circuit: No disassembly, no rupture & no fire (Max external temperature: 66.4 ~ 78.8°C)
Impact: No disassembly & no fire (Max external temperature: 106.9 ~ 129.2°C)
Forced Discharge: No disassembly & no fire

Charging ​

Inputs
Voltage Range V5-14
Current Limit A0.1 to 3.25
Features
Fast Charge5-14V input with Fast Charge support
ConfigurableConfigurable draw and charge rates

Components ​

Cellular
ManufacturerSIMCom Wireless Solutions Limited
ModelSIM7000G
SpecificationsSupported Technologies: LTE CAT-M1, LTE NB-IoT, GPRS, EDGE
Frequency Bands: Gsm: Bands: 850/900/1800/1900MHz
Egsm 900mhz: Transmit Frequency Mhz: 880-915
Receive Frequency Mhz: 925-960
Dcs 1800mhz: Transmit Frequency Mhz: 1710-1785
Receive Frequency Mhz: 1805-1880
Lte Cat M1: Bands: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B26/B28/B39
Lte Nb Iot: Bands: B1/B2/B3/B5/B8/B12/B13/B17/B18/B19/B20/B26/B28
Data Transfer Rates Kbps: Cat M Dl: 300
Cat M Ul: 375
Cat Nb Dl: 34
Cat Nb Ul: 66
Egprs Dl: 85.6
Egprs Ul: 85.6
Edge Dl Ul: 236.8
Gprs Dl Ul: 85.6
Supply Voltage Range V: 3.0 ~ 4.3
Power Consumption Typical: Power Off Ua: 7
Psm Ua: 9
Sleep Ma: 1
Idle Ma: 11
Temperature Range C: -40 ~ +85
Certifications: FCC, IC, CE, 3C, GCF, RoHS, REACH, RCM, PTCRB
Bluetooth LE
ManufacturerSTMicroelectronics
ModelSTM32WB55xx
SpecificationsChip Type: Multiprotocol wireless 32-bit MCU Arm®-based Cortex®-M4 with FPU
Radio Features: Frequency: 2.4 GHz
Bluetooth Specification: 5.4
Ieee 802 15 4 Support: Yes (supports PHY and MAC, supporting Thread 1.3 and Zigbee® 3.0)
Rx Sensitivity Dbm: Bluetooth LE 1mbps: -96
Ieee 802 15 4: -100
Programmable Output Power Dbm: +6 (with 1 dB steps)
Integrated Balun: Yes
Data Rates Mbps: 1, 2
Dedicated Radio Cpu: Arm® 32-bit Cortex® M0+
External Pa Support: Yes
Memory: Flash Memory Size: Up to 1 Mbyte
Sram Size: Up to 256 Kbytes (includes 64 K SRAM1 and 64 K SRAM2 for STM32WB55Cx models)
Operating Voltage V: 1.71 to 3.6
Operating Temperature C: -40 to +85 and -40 to +105 (Ambient)
Power Consumption Typical Ma At 3 3v: Tx Max Output Bluetooth LE: 7.8
Tx Max Output 802 15 4: 6.5
Rx Bluetooth LE: 4.5
Rx 802 15 4: 4.5
Run Mode Flash 64mhz Typical Ma: 8.8
Gnss
ModelSIM7000G
SpecificationsGnss Systems: GPS, BeiDou, GLONASS
Receiver Type: Channels: 16-channel
Code: C/A Code
Sensitivity: Tracking: GPS: -162 dBm
GLONASS: -157 dBm
BeiDou: unknown
Cold Starts: -148 dBm
Time To First Fix: Cold Starts: <35s
Hot Starts: <1s
Accuracy: Position: <2.5m CEP
Wifi
ManufacturerEspressif Systems
ModelESP8285
SpecificationsSoc Description: Highly integrated Wi-Fi SoC solution for IoT industry (can perform as a standalone application or as the slave to a host MCU)
Recommended Upgrade: ESP8684
Wi Fi Protocols: 802.11 b/g/n (HT20)
Wi Fi Frequency Range Mhz: 2400 ~ 2483.5
Tx Power Dbm: 802 11b: +19
802 11g 6mbps: +19
802 11g 54mbps: +15
802 11n Mcs0: +19
802 11n Mcs7: +14
Rx Sensitivity Dbm: 802 11b 1mbps: -97
802 11g 54mbps: -74
802 11n Mcs7: -70
Cpu: Tensilica L106 32-bit processor (up to 160 MHz)
Memory: 1 MB
Operating Voltage V: 2.7 ~ 3.6
Crystal Frequency Range Mhz: 24 ~ 52
Power Consumption Deep Sleep Ua: 20
Power Consumption Active Ma: Average: 80
Tx 802 11b 19dbm: 197
Rx 802 11b: 73
Modem Sleep Typical: ~15 (DTIM3, 300ms sleep/3ms wakeup)
Light Sleep Typical: ~0.9 (DTIM3, 300ms sleep/3ms wakeup)
Accelerometer
ManufacturerSTMicroelectronics
ModelLIS3DHTR
SpecificationsDevice Type: MEMS digital output motion sensor: ultra-low-power high-performance 3-axis 'nano' accelerometer
Data Output: 16-bit
Full Scale Range: ±2g/±4g/±8g/±16g (dynamically selectable)
Supply Voltage V: 1.71 to 3.6
Operating Temperature C: -40 to +85
Power Consumption Ulp Ua: down to 2 (normal mode at 1 Hz ODR)
Charger
ManufacturerTexas Instruments
ModelBQ25890H
SpecificationsDescription: I2C Controlled Single Cell 5-A Fast Charger with MaxChargeTM Technology
Charge Current A: 5 (Fast charge current, adjustable from 128mA to 5056mA)
Charge Efficiency Percent: At 2a: 93
At 3a: 91
Usb Otg Output V: 4.5 to 5.5 (adjustable)
Usb Otg Output Current A: 2.4
Boost Efficiency Percent: 93 (at 5V, 1A output)
Input Voltage Range V: 3.9 to 14
Input Current Limit A: 0.1 to 3.25 (50-mA resolution, automatically set by source detection)
Battery Discharge Mosfet Resistance Mohm: 11
Battery Discharge Current A: up to 9 (peak, up to 1 sec duration)
Integrated Adc For Monitoring: Voltage, Temperature, Charge Current
Power Path Management: Narrow VDC (NVDC), with automatic power path selection
Operating Temperature C: -40 to 85
Bme280
ManufacturerBosch Sensortec
ModelBME280
SpecificationsDescription: Humidity sensor measuring relative humidity, barometric pressure and ambient temperature
Operation Range Temperature C: -40 to 85
Operation Range Pressure Hpa: 300 to 1100
Humidity Accuracy Pct: ±3
Pressure Accuracy Hpa: 0.002
Supply Voltage V Vddio: 1.2 to 3.6
Supply Voltage V Vdd: 1.71 to 3.6
Interface: I²C and SPI
Average Current Consumption Ua 1hz H T: 1.8
Average Current Consumption Ua 1hz P T: 2.8
Average Current Consumption Ua 1hz H P T: 3.6
Average Current Consumption Sleep Mode Ua: 0.1
Response Time Humidity S: 1
Hysteresis Humidity Pct: <=2
Rms Noise Pressure Hpa: 0.002
Temperature Coefficient Offset Pressure Pak: ±1.5
Package Dimensions Mm: 2.5 x 2.5 x 0.93
Ms5637
ManufacturerMEAS Switzerland
ModelMS5637-02BA03
SpecificationsDescription: Ultra-compact micro altimeter for precise digital 24-bit pressure and temperature value, optimized for altimeter and barometer applications. Used for dew point calculation.
Package Dimensions Mm: 3 x 3 x 0.9
Supply Voltage V: 1.5 to 3.6
Fast Conversion Speed Ms: 0.5
Low Power Ua Standby: 0.1 (at 25°C)
Typical Active Current Consumption Ua: 0.6
Interface: I2C
Operating Range Pressure Mbar: 300 to 1200
Operating Range Temperature C: -40 to +85
Adc Resolution: 24 bit
Pressure Resolution Mbar: 0.016 (at OSR 8192)
Pressure Error Band At 25c Mbar: ±2 (300 to 1200 mbar)
Pressure Error Band At 20 To 85c Mbar: ±4 (300 to 1200 mbar)
Long Term Stability Mbar Per Yr: ±1
Temperature Accuracy At 25c: ±1
Temperature Resolution C: <0.01
Max Soldering Temperature C: 250 (40 sec max)
Esd Rating Hbm Kv: ±2

Specification ​

AttributeValue
DeviceEN2
Size85 x 44 x 28.4 mm
Weight152g
Battery6600mAh (Rechargeable Lithium)
SimIntegrated roaming sim
GSMQuadband 4G LTE-M & NBIoT + 2G fallback
Bluetooth5.0
PositioningGPS (GPS, GLONASS, BEIDOU, GALILEO & QZSS), WiFi & GSM
SensorsHigh accuracy Temperature & Humidity Sensors, Orientation, Accelerometer, External Bluetooth
Memoryup to 1000 locations update when they can't be transmitted
IP ratingShockproof
Operating Temperature-20°C to 60°C ¹
Buttons1
LEDs6 (4x battery, 2x status)
SoundBuzzer
ChargingMagnetic 4 pin connector
Additional
Typical UsageFor tracking temperature & humidity sensitive non powered assets
OptionalNFC

¹ All device batteries can be customized down to -40°C with other tradeoffs, please contact us for more information.

Charging ​

The Pro tracker is charged using a magnetic 4 pin connector, and should be charged for 5 hours before initial use.

This connecter can be used with a magnetic cable or a pro charging dock.

For six-indicator models, the battery lights show the charge level and the highest lit battery light blinks while charging below about 95%. At higher charge levels, the normal display becomes steady. See four power LED charging patterns.

When unplugged and resting, the lights normally go out, but a button press, restart or other device activity can still light them.

⚠️ Warning

It is advised to use an adapter plugged into a power socket rather than using a computer USB port or similar.